Shimano Ultegra And Dura
Seems okay now and E-TUBE exhibits the correct actual sprocket selected. So, i ordered a brand new one, and now the PCE-02 wont even recognize the SM-BMR2. It goes by way of the process of making an attempt to acknowledge the gadget, then simply goes again to the home page of e tube. THis happens both when i hook up with the whole system through the shifter or directly to the battery mount . Once the lever is pressed the voltage rises by, I assume zero.three to 0.5 volts on the wire.
Next, function shifting change 4 times to maneuver the guide pulley toward the outside by four steps to the target place. While turning the front chainwheel, operate shifting switch to maneuver the guide pulley towards the inside until the chain touches the 4th sprocket and makes a slight noise.
2 Wheel Eec Electric Scooter Adult Lvneng Manufacturing Unit Low Cost Worth 3000w
A used substitute half off ebay could be the potential low cost answer. I first used a SM-BMR1 battery mount and only the entrance derailleur worked. It could not be updated using the SM-PCE02. I suspect that to replace the SM-BMR1 you want the Sm-PCE1.
This just isn’t from the derailliuers because with both plugged out, the voltage still increased with the lever pressed. This check was carried out with 2015 12 months battery on a 6870 system. I’ve by no means seen it absolutely documented, nevertheless it’s a regular CAN protocol … Read More